Removing The Cassette Size Detection Unit - Canon AD2 Service Manual

3
Parts Replacement Procedure > Parts Replacement > Removing the Cassette Size Detection Unit
1) Remove the Sensor Unit.
• 1 screw
• 1 connector
• 1 harness guide
2)Remove the cassette 3 Pickup Unit
• 4 screws
x4
3 Parts Replacement Procedure > Parts Replacement > Removing the Cassette Size Detection Unit
Connector
Sensor Unit
Harness Guide
F-3-15
F-3-16

Removing the Cassette Size Detection Unit

Before removing the Cassette Size Detection Unit
• Remove the Right Front Cover
• Remove the Right Rear Cover
• Remove the Cassette Pickup Unit
How to remove
MEMO:
This procedure describes the removing steps of Cassette 3 Size Detection Unit. Go
through the same procedure for Cassette 4 Size Detection Unit.
1) Remove the Cassette 3 Size Detection Unit
• 1 connector
• 1 wire saddle
• 2 screws
x2
Connector Wire Saddle
3-7
Cassette 3 Size Detection Unit
F-3-17
3-7