Managing Device Setups; Saving Default User Setup; Resetting To Default User Setup; Resetting To Factory Default - ABB LWT300 Series User Manual

Managing device setups

Configuring or reconfiguring your instrument could take a non trivial amount of time. With that in mind,
once you have properly configured your instrument, you can save your setup as a baseline configuration
that you can revert to if necessary. The following pages explain how to proceed.

Saving default user setup

To save your current configuration as your default user setup:
1 Select Device Setup > Save Setup & reset > Save as User Default.
2 Press OK. Your current setup is saved in the instrument non-volatile memory.

Resetting to default user setup

Provided that you have already saved a setup as your default setup, you can return to that default user
setup at any time.
To do so:
1 Select Device Setup > Save Setup & reset> Reset to User Default.
2 Press OK. Your current setup is erased and replaced with the default user setup.

Resetting to factory default

Should you be in a situation where the default user setup does not work anymore (e.g., you have moved
the LWT instrument to a new vessel), you can simply revert to the factory default setup and start
configuring your instrument anew.
NOTICE
When resetting to the factory default configuration, all parameters and passwords return
to their original factory settings
To do so:
1 Select Device Setup > Save Setup & reset > Global Factory Reset.
2 Press OK. Your current setup is erased and replaced with the default factory setup. The LWT
instrument will complete the reset after about 15 seconds.
Configuring the instrument
59