Upon Startup - ABB LWT300 Series User Manual

Upon startup

Upon startup, the LCD turns on, the instrument establishes connection and the display starts showing
values on Operator page 1 based on the factory-set configuration.
NOTICE
For instruments equipped with the through-the-glass (TTG) display option, wait for the HMI
calibration process to complete (±30 seconds after power-on) before operating the HMI.
—
Figure 21 Instrument LCD on power-up
—
Figure 22 Initial Operator page with values based on default configuration
NOTICE
During the boot process, no level information is displayed.
For more information on Operator pages, see "Configuring Operator pages" on page 40.
The next chapter introduces the standard instrument user interface: the human-machine interface
(HMI).
31
Installing the LWT