Table of Contents
Advertisement
4.3
Ambient and Environmental Conditions
When you plan your project, you should make the following allowances :
● Observe the climatic and mechanical environment conditions described in section
● The device is approved for operation in closed rooms only.
● Avoid extreme ambient conditions. Protect the device against dust, moisture and heat.
● Do not place the device in direct sunlight.
● Ensure that the distance to other components or the sides of cabinets is at least 50 mm
● Do not cover the ventilation slots of the device.
● Always observe the mounting positions permitted for this device.
● The connected or installed I/O must not generate a reverse voltage greater than 0.5 V in
SIMOTION P320-3 and Panel Fronts
Manual, 02/2012
General specifications (Page 107).
above and 100 mm below the device.
the device.
4.3 Ambient and Environmental Conditions
Application planning
71
Advertisement
Table of Contents
