Installing/Mounting
5.1 Installing SIMOTION P320-3
5.1.2
Mounting on DIN rails
Mounting the device on standard rails
Note
Use of Siemens 35 mm standard mounting rail is recommended.
Steps for mounting on standard rail
1.
Set the device inclined on the
standard rails.
2.
Swing the device fully onto the rails
until both clamps completely latch.
Note
To ensure secure vertical mounting on standard rails, a rail ground terminal should be
mounted beneath the device.
76
SIMOTION P320-3 and Panel Fronts
Manual, 02/2012