Permissible Mounting Positions Of The Panel Front - Siemens SIMOTION P320-3 Manual

Mounting position
Book mounting
RAL = Restricted Access Location
4.4.1

Permissible mounting positions of the panel front

Approval
Certain mounting positions are permitted for the SIMOTION panel fronts.
Permissible mounting positions for the SIMOTION panel front
Figure 4-2
Vertical installation and deviations of up to +20° and -20° in the given directions is
permissible.
Note
The mounting position illustrated has been tested and approved.
In the event of deviations from it, you might need to have additional tests carried out to verify
compliance with the general conditions applicable for the components used
(e.g. temperature). Siemens can provide appropriate support on request.
SIMOTION P320-3 and Panel Fronts
Manual, 02/2012
(installation of the device in operating facilities with restricted access - for example, a locked
control cabinet)
Permissible mounting position of the panel front
4.4 Mounting positions and fastening
Permitted temperatures / notes
0 to +45° C
See Section Upright mounting (Page 79)
Application planning
73