Emc Limit Values In South Korea; Emf Assessments For 24 V Components; Ec Declaration Of Conformity; Climatic And Mechanical Environmental Conditions - Siemens SINUMERIK ONE NCU 1740 Equipment Manual

5.1.3

EMC limit values in South Korea

The EMC limit values to be observed for Korea correspond to the limit values of the EMC product
standard for variable-speed electric drives EN 61800-3 of category C2 or the limit value class A,
Group 1 according to EN 55011. By implementing appropriate additional measures, the limit
values according to category C2 or limit value class A, Group 1, are observed. Further, additional
measures may be required, for instance, using an additional radio interference suppression
filter (EMC filter).
The measures for EMC-compliant design of the system are described in detail in this manual
respectively in the Installation Guideline EMC.
Please note that the final statement on compliance with the standard is given by the respective
label attached to the individual unit.
5.1.4

EMF assessments for 24 V components

The 24 V components, e.g. control systems (NCU, MCU, PPU), PCUs/IPCs, operator panels,
handheld terminals and machine control panels do not generate any appreciable
electromagnetic fields.
No minimum clearance has to be maintained for 24 V components.
5.1.5

EC Declaration of Conformity

The EC Declaration of Conformity for the EMC Directive can be found on the Internet at the
following address
support.industry.siemens.com/cs/ww/de/ps/14604/certww/en/ps/13231/cert).
5.2

Climatic and mechanical environmental conditions

5.2.1

Shipping and storage conditions

The components of the SINUMERIK ONE system exceed the requirements according to
EN 61800‑2 with regard to shipping and storage conditions.
NCU 1740
Equipment Manual, 10/2021, A5E51087503B AA
5.2 Climatic and mechanical environmental conditions
(https://support.industry.siemens.com/cs/https://
Application planning
43