Mounting With Mounting Brackets - Siemens SIMOTION P320-3 Manual

NOTICE
The rails are secured to a wall or cabinet similar to mounting with mounting brackets.
Ensure that the wall or ceiling can hold four times the total weight of the device (including
the rails and additional expansion modules). See also section Mounting with mounting
brackets (Page 77).
Removing the device from the mounting rails
● Push the device down until the clamps release it.
● Swing the device away from the rails.
5.1.3

Mounting with mounting brackets

Removing mounting clamps from the device
Two mounting clamps are factory installed on the device for mounting onto standard rail.
These need to be removed before mounting the mounting brackets.
Steps for removing the mounting clamps
Remove the four screws
the two mounting clamps
the back of the device.
SIMOTION P320-3 and Panel Fronts
Manual, 02/2012
②
and
①
from
Installing/Mounting
5.1 Installing SIMOTION P320-3
77