Getting Started - Timex Satellite Series Manual

Install AC Adaptor
Connect the AC adaptor cable plug into the jack on the back of the unit, then plug the AC adaptor into wall outlet.
Install/Replace Backup Battery
The TMX1 uses a backup battery system to provide continuous alarm operation and clock settings in the event of a power failure. If the
Backup Battery has been installed and a power failure occurs or the AC cord is accidentally disconnected, the display will remain lit
and the current time and alarm time settings will be temporarily maintained. Otherwise, you must reset the time and alarm settings.
If the unit has no display or the Battery Low Icon [
1. Please make sure the AC adaptor is connected. Otherwise all settings may be lost during battery
replacement.
2. Open the battery compartment cover located on the bottom of the unit.
3. Insert 2 "AA" (R6) batteries, checking that the polarity (+ and – ends of the batteries) matches
the drawing inside the battery compartment. We recommend the use of alkaline batteries for
longer life. Different types of batteries or new and used batteries are not to be mixed.
4. Close the battery door.
Batteries Information:
• Do not mix old and new batteries.
• Do not mix alkaline, standard (carbon -zinc) or rechargeable (nickel-cadmium) batteries.
Maintenance
• Place the unit on a level surface away from sources of direct sunlight or excessive heat.
• Protect your furniture when placing your unit on a natural wood and lacquered finish. A cloth or other protective material should be
placed between it and the furniture.
• Clean your unit with a soft cloth moistened only with mild soap and water. Stronger cleaning agents, such as Benzine, thinner or
similar materials can damage the surface of the unit.
Install XM antenna
Plug the XM antenna into the
XM radio company.

Getting Started

] located on the left of the display is lit, it is time to replace the backup batteries.
XM Antenna Jack located on the back of the unit for XM band radio operation. Please get details from
6