Auxiliary Input; Line Out Operation - Timex Satellite Series Manual

Auxiliary Input

To listen to another audio source such as an MP3 player through TMX1:
1. Connect the audio source's output to the jack marked "AUX" at the rear of TMX1.
2. While the power is ON, press L MODE button until "Aux input" appears in the display.

Line Out Operation

Line Out Jack located at
You can connect the unit to another line-level device such as an amplifier or recording device through the
the back of the unit. The volume setting on the unit does not affect the line level. Adjust volume level using the volume control on the
device you connect to.
Headphone Jack
Headphone Jack located on the back of the unit. The built-in speakers will not operate
Connect the headphone (not included) to the
while the headphone is connected.
Changing Volume
1. Press P Volume + button or Q Volume - button to change volume settings (0-30); the level is shown on the display. Volume does
NOT change once it has reached minimum (0) or maximum (30).
2. If volume is not changed after 2 seconds, unit will go back to previous state.
Adjusting Sound Quality
Press EQ knob repeatedly to select Rock, Classic, Pop , Jazz, or Flat until your desired sound mode selected.
Power On/Off
Press M Power button to turn the unit On or Off. Power On defaults to last mode used.
12