Bosch Rexroth CKL Series Commissioning page 23

12 Motor (continued)
12.2.1 Steps for configuring the linear motor from database: (continued)
3. Enter the primary and secondary type codes based on the below table, then select the
Linear and Synchronous options.
System size Carriage length
CKL 110 180 mm
240 mm
300 mm
CKL 145 244 mm
364 mm
484 mm
CKL 200 237 mm
297 mm
417 mm
xx: L0 = digital Hall, L1 = analog Hall, N0 = without Hall
xxxx: 0120, 0180, 0300 = secondary part length mm, select any value
4. Press the DB → Drive button to download the motor parameters to the drive.
Primary part
MCP030B-V180-NI-xxCN-NNNN
MCP030C-V180-NI-xxCN-NNNN
MCP030D-V180-NI-xxCN-NNNN
MCP040C-V300-NI-xxCN-NNNN
MCP040E-V300-NI-xxCN-NNNN
MCP040G-V300-NI-xxCN-NNNN
MCP070C-V300-NI-xxCN-NNNN
MCP070D-V300-NI-xxCN-NNNN
MCP070F-V300-NI-xxCN-NNNN
Motor
Secondary part
MCS030-3S-xxxx-NNNN
MCS030-3S-xxxx-NNNN
MCS030-3S-xxxx-NNNN
MCS040-3S-xxxx-NNNN
MCS040-3S-xxxx-NNNN
MCS040-3S-xxxx-NNNN
MCS070-3S-xxxx-NNNN
MCS070-3S-xxxx-NNNN
MCS070-3S-xxxx-NNNN
01.2015, USL00010, Bosch Rexroth Corp.
23