Dual Sensor Brake Support Off Switch - Suzuki Wagon R Instruction Manual

000.book 62 pages Friday, July 28, 2017 2:30 PM
When driving / Driving support function
Warning
 Do not modify the suspension or
headlight, or remove the laser radar
and monocular camera. High beam
assist may not work properly.
 When the high beam assist light
warning light (orange) keeps on, the
system may have some problems, so
please be sure to check at the Suzuki
authorized service factory.
Advice
 You can switch (customize) the setting of
4
"Yes" and "None" of the high beam assist
function. For setting change, consult a
Suzuki store or Suzuki agent.
 Light vehicles such as bicycles may not
be detected.
 At the time of rapid acceleration, even if
the vehicle speed exceeds approximately 30
km / h, the high beam assist function may
not operate for several seconds.
 High beam and low beam may change
depending on driver 's feeling.
4-62
Dual sensor brake support
OFF switch
Dual sensor brake support and false start
suppression function can be stopped.
 To stop the function, keep the dual
sensor brake support OFF indicator (2)
on the meter light
Al sensor brake support OFF
Touch and hold switch (1).
 To restore the function, press and hold
the dual sensor brake support OFF switch
again to dual sensor Interlock brake
support OFF Turn off the indicator light.
 Each time the engine is stopped
manually, the function returns and the
dual sensor brake
The support OFF indicator light turns off.
 Every time the Dual Sensor Brake
Support OFF switch is pressed, the indoor
buzzer will "beep" and inform you that the
operation has switched.
(2)
(1)
63R40390