How To Move The Select Lever - Suzuki Wagon R Instruction Manual

000.book 17 pages Friday, July 28, 2017 2:30 PM

How to move the select lever


The figure above is a typical
example. It depends on the type of
car.
Step on the brake pedal, press the
Hold down the button and
select Move the lever.
Move the select lever
without pressing the
button.
Hold down the button and
move the select lever.
Please make the stop completely, please
put the select lever in R. If the car is
moving, the transmission may break
down. In order
transmission, gear
possible when the forward vehicle speed
is about 10 km / h or more. (Leave
neutral)
74P40060
Note
to protect the
shifting is not
When driving, / Automatic car
Advice
Please do not hit the button of
select lever, do not press the button.
If you always operate by pressing
the button, you may accidentally
put it in P R, L or M.
Shift lock system
■
It is a system to prevent erroneous
operation of the select lever when
starting off.
Move the select lever from P to

another position only when the
engine switch is ON and stepping on
the brake pedal.
When the engine switch is ACC or

LOCK (OFF), even if you press the
brake pedal, you can not move the
select lever from P to another
position.
Do not press the brake pedal after

pressing the select lever button.
Shift lock may not be canceled.
In the unlikely event that you turn
on the engine switch, even if you

step on the brake pedal
If you can not move the treble from
P to another position, follow the
procedure on the next page.
Please unlock the foot lock. In this
case, failure of the shift lock system
etc. is conceivable. Please receive
inspection immediately at the
Suzuki service factory.
Warning
If you spill drinks or etc on the
movable part of the select lever or
if foreign matter
shift lock system will not work properly
so please take service check at Suzuki
authorized service factory as soon as
possible.
4
enters inside,
4-17