Table of Contents
Advertisement
1.5 Qualified personnel
Only those persons familiar with the installation, commissioning, operation and mainte-
nance of the TZID positioner or similar instruments who have the required qualification
and have read and understood the operating instructions are authorized to work on the
TZID positioner. These persons must be sufficiently trained and experienced and know
the relevant standards and regulations to be able to judge their assigned tasks and rec-
ognize potential hazards. Only persons who are qualified or have been trained ade-
quately and who have the required certificates are authorized to work on explosion-
protected devices.
2
Manufacturer's information
2.1 Delivery
When receiving the delivery please immediately check items and scope for intactness
and completeness. The scope of delivery is stated in the shipping documents. If ordered,
the accessories (e.g. mounting material, pressure gauge block, filter regulator) are added
to the delivery as individual items. Check items and scope of the delivery by means of
the catalog numbers to see if types and quantities are in accordance with your order. If
the positioner is delivered already mounted to the actuator, the positioner, accessories
and actuator or final control element are considered as a common delivery item. A list of
catalog numbers and details of the different versions and accessories can be found in
data sheet 18-0.20 EN.
2.2 CE compliance information
We declare that we are the manufacturer of the TZID positioner and that the product con-
forms with the EMC Directive 89/336/CEE as of May 1989 and meets the requirements
of the following standards:
•
EN 55022:1998 "Information technology equipment, Radio disturbance
characteristics, Limits and methods of measurement"
•
EN 61000-6-2:8/2002 "Electromagnetic compatibility (EMC)
Part 6-2: Generic standards - Immunity for industrial environments
•
EN 61000-6-3:3/2000 "Electromagnetic compatibility (EMC)
Part 6-3: Generic standards - Emission standard for residential, commercial and
light-industrial environments
The TZID positioner complies with the EC directive for CE conformity certification.
10
Electro-pneumatic positioner TZID
42/18-54 EN
Hide quick links:
Advertisement
Table of Contents
