Testing Functions; Selecting The Internal Fault Test - ABB ABILITY SSC600 Operation Manual

1MRS758850
1.
2.
3.
4.
3.5.2

Testing functions

Before you begin
Activate or deactivate an output signal for protection or other function to test the function.
1.
2.
3.
4.
5.
3.5.3

Selecting the internal fault test

The internal fault test can be activated by from the IED test view.
SSC600
Operation Manual
Select IED test from the main menu structure to activate the IED test view.
Figure 4. IED test view
Enable parameter editing by selecting Enable Write
Select the test mode to be activated by changing the New Value field selection.
Select Write to IED
The selected test mode is now activated.
Select Tests > Function tests from the main menu structure.
Select the function test type from the main menu structure.
Enable parameter editing by selecting Enable Write
Select the test to be activated by changing the New Value field selection.
Select Write to IED
The selected test is now activated.
to save changes into the IED's memory.
to save changes into the IED's memory.
Commissioning
.
.
25