Huawei PDU8000 User Manual page 42

PDU8000 UPS Power Distribution Cabinet
User Manual

Avoid bumping the cabinet, and do not expose it to rain or snow.
Step 1 Check whether the equipment is correct and intact.
1.
2.
Step 2 Move the PDC to the specified installation position.
Step 3 (Optional) Remove the L-shaped kits from the PDC and pallet, as shown by (1) in
Step 4 Remove the bolts from the pallet under the PDC, as shown by (2) in
Step 5 It is recommended that six people work together to move the PDC away from the pallet, as
shown by (3) and (4) in
Figure 5-1 Removing the bolts and pallet
Step 6 (Optional) Adjust the PDC anchor bolts to ensure that all castors touch the ground.
----End
Issue 01 (2016-03-04)
Move the cabinet with caution to avoid bumping or toppling. To prevent damaging the
equipment, exercise caution when removing the packing materials.
Visually inspect the equipment appearance to check whether the equipment is
paint-peeling, misshapen, scratched, or soaked. If yes, record the information and contact
the equipment carrier and the local Huawei office immediately.
Check against the packing list that the equipment and fittings are correct and complete. If
some fittings are missing or do not conform to the packing list, record the information
and contact the local Huawei office immediately.
Figure
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
5-1.
5 Installation Guide
Figure 5-1.
Figure 5-1.
36