Huawei PDU8000 User Manual page 26

PDU8000 UPS Power Distribution Cabinet
User Manual
Step 3 Press down the locking latch on the switch panel and pull out the handle, as shown in
4-15.
Figure 4-15 Pulling out the handle
If the handle is not pulled out, the automatic mode will be disabled.
Step 4 Flip the electric/manual lever to the
Figure 4-16 Electric/manual mode selection lever
Step 5 Check whether the Power LED indicator has turned on, as shown by (1) in
Step 6 Check whether the Auto LED indicator has turned on.

Issue 01 (2016-03-04)
If the Auto LED indicator is off, the controller is working in the button mode, as shown
by (3) in Figure 4-17.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
position, as shown in Figure
4 Components
Figure
4-16.
Figure 4-17.
20