Section 9 − Parts List - Miller Millermatic 255 Owner's Manual

9-1. MDX-250 MIG Gun Consumables And Recommended Spare Parts
See OM-282976 (shipped with this product) for information on replacement consumables for the MDX welding gun.
9-2. Drive Roll And Wire Guide Kits
.
Base selection of drive rolls upon the following recommended usages:
1 V-Grooved rolls for hard wire.
2 U-Grooved rolls for soft and soft shelled cored wires.
3 U-Cogged rolls for extremely soft shelled wires (usually hard surfacing types).
4 V-Knurled rolls for hard shelled cored wires.
5 Drive roll types may be mixed to suit particular requirements (example: V-Knurled roll in combination with U-Grooved).
Wire Diameter
Fraction Decimal
0.023/0.025 in. 0.023/0.025 in.
0.030/0.035 in. 0.030/0.035 in.
0.030 in. 0.030 in.
0.035 in. 0.035 in.
0.045 in. 0.045 in.
.
A complete Parts List is available at www.MillerWelds.com
SECTION 9 − PARTS LIST
Kit No.
Metric
0.6 mm 087131
0.8/0.9 mm 204579
0.8 mm 079594
0.9 mm 079595
1.2 mm 079596
Drive Roll
Part No. Type
087130 V-Grooved
203526 V-Grooved
053695 V-Grooved
053700 V-Grooved
053697 V-Grooved
Inlet Wire
Guide
056192
056192
056192
056192
056193
OM-279299 Page 49