Integrated I/O - Siemens SENTRON PAC3200 Manual

9.2.6

Integrated I/O

Device settings for using the digital input and output.
Call: "SETTINGS > INTEGRATED I/O".
Figure 9-8
DIGITAL OUTPUT
Figure 9-9
ACTION
SENTRON PAC3200
Manual, 02/2008, A5E01168664B-04
"INTEGRATED I/O" device setting
"DIGITAL OUTPUT" device setting
Method of using the digital output:
OFF:
DEVICE ON:
REMOTE OUTPUT.
ROTATION:
LIM.VIOLATION:
9.2 Parameterizing the operator interface
The digital output is switched off.
The digital output is switched on.
The digital output is controlled by remote
access, e.g. SEAbus, SEAbus TCP,
PROFIBUS DP, Modbus RTU,
Modbus TCP.
The digital output is switched on by a left-
rotating electrical field and remains active
while the direction of rotation of the field
remains unchanged.
The digital output is switched on by a limit
violation and remains active while the limit
violation prevails.
The field "DIGITAL OUTPUT > SOURCE"
selects the limit to be monitored. The
definition of the limit is stored in
"ADVANCED > LIMITS".
Parameterize
137