Programming commands
6.2 Methods
"Global" programming
Syntax:
Description:
Parameters:
Example
CHANGE()
EXIT
END_CHANGE
See also
Behavior when opening the dialog (attribute CB) (Page 298)
6.2.3
CHANNEL
Description
The CHANNEL method is run through when the current channel has changed for an opened
screen, i.e. a channel switchover has been performed.
Programming
Syntax:
Description:
Parameters:
See also
S_CHAN variable (Page 116)
128
CHANGE()
...
END_CHANGE
Changes any variable value
- None -
; If any of the variable values change, the di-
alog will be terminated.
CHANNEL
<instructions>
END_CHANNEL
Channel switchover
- None -
Programming Manual, 12/2017, 6FC5397-1DP40-6BA1
SINUMERIK Integrate Run MyScreens (BE2)