Answer A Voice Call Handsfree; Automatic Intercom - NEC Univerge SV9300 Series User Manual

ANSWER A VOICE CALL
HANDSFREE
This feature allows the terminal user to answer a
Voice Call without lifting the handset.
1. You will receive an incoming Voice
Call.
VOICE CALL
4:26 PM MON 11 MAY 2015
R-TONE MIC
2. Press Mic Key.
Mic key lamp lights red. →
3. Respond to call handsfree.
4:26 PM MON 11 MAY 2015
MIC Mute

AUTOMATIC INTERCOM

200
TO INITIATE
201
TO ANSWER
81
FEATURE OPERATION
Automatic Intercom provides a path for voice
announcement calls between two terminals using
a Line key. Private conversations can be held. The
Busy/Idle status of the associated the terminal is
displayed on the Automatic Intercom feature key
LED.
The feature key is set by system data setting
at initial installation. For details, please
contact the system administrator.
1. Press Speaker key.
You will receive a dial tone.
Speaker key lamp lights red. →
2. Press Automatic Intercom feature
key.
The called terminal receives a tone burst.
ICM
4:26 PM MON 11 MAY 2015
MIC DIR
1. While hearing ringing tone,
Automatic Intercom feature key lamp flashes
green. →
Voice Call alert tone is heard.
ICM
4:26 PM MON 11 MAY 2015
MIC DIR
2. Press Automatic Intercom feature
key.
Automatic Intercom feature key lamp lights
green. →
3. Press Speaker key.
Speaker key lamp lights red. →
201
HIST. >>>>
200
HIST. >>>>