To Change Password - NEC Univerge SV9300 Series User Manual

TO CHANGE PASSWORD

Following explains how to change an existing
password. The password is used for the following
occasions.
• To lock/unlock the terminal.
• To reset the terminal settings.
Depending on the System Configuration, the
expiration date of password can be specified.
When the expiration date has passed, the
following error message is displayed on the
Desktop screen. For details, please contact
the system administrator.
Password Expired!
Please change your password.
1. Press
Menu
Menu Screen.
2. Select "Setting".
Highlight an item by using
.
3. Select " User Setting".
Select one of the following operations.
• Highlight an item by using
, or Soft key (OK).
• Press .
User Setting
1
Download
2
↓
4. Select " Change Password".
Select one of the following operations.
• Highlight an item by using
, or Soft key (OK).
• Press .
Display
3
Change Password
4
↑ ↓
OK
key to display the
, and press
, and press
Back OK
, and press
Back OK
5. Enter the old password.
After entering the old password, press
Soft key (Set).
Old Pass
New Pass
BK
The initial password is "0000". When
changing the password for the first time,
enter "0000" as the old password.
In order to ensure the security and avoid the
unauthorized use, please be sure to change
the password at the time of initial use. The
password shall be difficult to guess from a
third party. And it shall be changed regularly
to keep security level.
6. Enter the new password.
After entering the new password, press
Soft key (Set).
Old Pass
New Pass
BK
Up to 32 digits can be set as a password.
7. Enter the new password again.
Retry Pass
BK
38
TERMINAL SETUP
Set Cancel OK
****
Set Cancel OK
Set Cancel OK
or
1
or
1
1