Call Pickup - Group - NEC Univerge SV9300 Series User Manual

2. Press Speaker key.
Speaker key lamp lights red. →
Line key lamp lights green. →
3. Talk toward the mic.
4:26 PM MON 11 MAY 2015
MIC Mute
When you make a call handsfree, please
note the following items.
• Avoid using in a place where there is a
lot of echo or noise.
• The Microphone is located at the front
of the terminal. It should be no further
away than 50 cm.
• When talking handsfree, be aware of
the volume level as to not disturb
people close to you.
• Talk alternately with the other party.
The voice may be interrupted if both
party talk at the same time.

CALL PICKUP - GROUP

201
66
FEATURE OPERATION
This feature permits a terminal user to answer any
calls directed to other extensions in their preset
pickup group.
This feature is set by system data setting at
initial installation. For details, please contact
the system administrator.
This feature is set by Soft key or feature key.
The feature key is set by system data setting
at initial installation. For details, please
contact the system administrator.
1. Ringing terminal in your Call Pickup
- Group.
2. Press Speaker key.
Speaker key lamp lights red. →
Line key lamp lights green. →
4:26 PM MON 11 MAY 2015
Recall PICK
3. Press Soft key (PICK) or Call Pickup
- Group feature key.
PICK UP
4:26 PM MON 11 MAY 2015
MIC Mute
4. Start conversation with calling party.
200
>>>>
201 210