Receiving A Voice From Speaker; Talking Handsfree - NEC Univerge SV9300 Series User Manual

RECEIVING A VOICE FROM
SPEAKER
It is possible to change the terminal to "listen-only"
during the call in progress. You can hear the
caller's voice from the speaker on the terminal with
putting the handset on the hook.
TO RECEIVING A VOICE
FROM SPEAKER
1. Call in progress.
4:26 PM MON 11 MAY 2015
MIC Mute
2. Press Speaker key.
Speaker key lamp lights red. →
3. Replace the handset.
You can hear the voice of calling party from
the speaker.
TO RESTART TALKING
1. Receiving a voice from the speaker.
2. Lift the handset.
Speaker key lamp goes off. →

TALKING HANDSFREE

TO SET HANDSFREE
TO CANCEL
201
TO MAKE A CALL WITH
HANDSFREE
TO ANSWER A CALL WITH
HANDSFREE
65
FEATURE OPERATION
Dialing or answering a call is possible without lifting
the handset.
1. Press Mic key or Soft key (MIC).
Mic key lamp lights red. →
1. Press Mic key or Soft key (MIC).
Mic key lamp goes off. →
1. Mic key lamp is going off. →
2. Press Speaker key.
Speaker key lamp lights red. →
Line key lamp lights green. →
4:26 PM MON 11 MAY 2015
Recall PICK
3. Dial desired number.
4:26 PM MON 11 MAY 2015
Recall VOICE
4. The called party answers.
• Press Mic key or Soft key (MIC).
Mic key lamp lights red. →
• Talk toward the mic.
4:26 PM MON 11 MAY 2015
MIC Mute
1. The Call Indicator Lamp flashing.
Line key lamp flashes red. →
200
>>>>
201
CB >>>>
201