To Enable/Disable Rtp Alarm - NEC Univerge SV9300 Series User Manual

Tone Type 1 to Tone Type 8:
In the preview function, each ringer tone
sounds continuously. However when "
Automatic" is selected, each ringer pattern of
internal and external incoming calls is
determined by the initial system settings. For
details, please contact the system
administrator.
When selecting " Automatic", the preview
function will not operate. Setting by Feature
key and become effective.
The "Music Ring 1/2/3" have been
downloaded at factory to terminal firmware
3.1.0.0 or later. When you use ring tone
music source other than "Music Ring 1/2/3",
please download other music file.
For the procedure of downloading a ringer
tone file, please refer to "TO DOWNLOAD A
FILE" on page 41.
A ringtone file can't be downloaded by
ITY-6D/6DG.
TO ENABLE/DISABLE RTP
ALARM
Following explains how to enable/disable RTP
Alarm. The RTP Alarm tone allows the terminal
user to be notified that the voice packet is not
received in a certain period of time because of the
network delay etc.
1. Press
Menu Screen.
2. Select "Setting".
Highlight an item by using
.
3. Select "
Select one of the following operations.
• Highlight an item by using
,
• Press
User Setting
1
Download
2
4. Select "
Select one of the following operations.
• Highlight an item by using
,
• Press
1 Incoming Call
2 Talk
↑
5. Select "
Select one of the following operations.
• Highlight an item by using
,
• Press
RTP Alarm
1
DTMF Tone
2
30
TERMINAL SETUP
key to display the
Menu
, and press
User Setting".
, and press
or Soft key (OK).
.
↓ Back OK
Talk".
, and press
or Soft key (OK).
.
↓ Back OK
RTP Alarm".
, and press
or Soft key (OK).
.
↓ Back OK