Dial By Name (Directory Search); To Make A Call Using Dial By Name - NEC Univerge SV9300 Series User Manual

DIAL BY NAME
(DIRECTORY SEARCH)
This feature is a common/personal directory
service which is supported by UNIVERGE SV9300
communication server. This feature allows a
terminal user to search desired party by name.
After searching the called party, the user can
originate a call to that party.
The feature is set to the terminal by system
data setting at initial installation. For details,
please contact the system administrator.
The dialed numbers of common directory are
set by system data setting at initial
installation. For details, please contact the
system administrator.
TO MAKE A CALL USING
DIAL BY NAME
1. Display the search screen.
• When using the System Speed Dialing,
press Soft key (DIR).
• When using the Station Speed Dialing,
• Press
Directory).
MARY SMITH
4:26 PM MON 11 MAY 2015
MIC DIR
2. Enter the characters of the name
that want to search.
Up to 4 characters can be entered for
keyword searching.
Please refer to
CHARACTERS" on page 102
enter the character.
NAME :
(ABC) ENTRY
(Searching for
[200]
HIST. >>>>
"APPENDIX B INPUT
for how to
SMIT
Common Person

DIAL BY NAME (DIRECTORY SEARCH)

3. Select the directory database.
(Common or Personal directory)
Press Softkey (Common) or Soft key
(Person)
• Display example of when you pressed
Soft key (Common)
NAME :
(ABC)
• Display example of when you pressed
Soft key (Person)
03:
Back
When pressing Soft key (￪Prev) or Soft key
(￬Next) without entering the keyword, the
registered dial number or name is displayed
on the LCD in order.
4. Press Speaker key or
call.
You will receive a dial tone.
Speaker key lamp lights red. →
Line key lamp lights green. →
Recall
5. Lift the handset to start a
conversation.
Speaker key lamp goes off. →
0:00:05
4:26 PM MON 11 MAY 2015
MIC
95
SMIT
ENTRY Common Person
ENTRY
↑Prev ↓Next
to make a
81XXXXXXXXXX
JAMES SMITH
PICK >>>>
DDD
Mute