Sanyo DVP-P1EX Technical Information page 29

The ribbon is rolling over the "COMPL,PIPE DRUM RUBBER (4A000) " too.
To set the "CAM,MECHANISM L (5K000) " to exit paper mode 2 , rotate the worm
gear on the "COMPL,MOTOR CAM (6A000) ".
Rotate the "PULLEY,DRUM (4F000) " in the reverse direction and remove the ink
cassette slowly.
Both can be taken out.
Rotating in regular direction
Rotate the "PULLEY,DRUM (4F000) "
in the regular direction and take the
printing paper out.
Dis-assemble the compl mechanism to the
point of removing the "COMPL, HOLDER,
PINCH ". (Refer to NOTE 2.)
Remove the parts concerned with the end
of the printing paper and take the printing
paper out slowly.
A
Remove the cabinet parts and remove the compl mechanism.
Can the ink cassette and the ink ribbon
be taken out?
Cut the ribbon close to the ink cassette.
Rotate the "COMPL,PIPE DRUM RUBBER
(4A000) " in the regular direction until the
end of the ribbon comes to the paper exit
and take the ribbon out slowly.
The ribbon can be taken out.
After rotating the "PULLEY,DRUM (4F000) "
once in the reverse direction, rotate it in
the regular direction and check that the
printing paper is carried out.
Rotate the "COMPL,PIPE DRUM RUBBER
(4A000) " with the printing paper in the
reverse direction from the back side with
your hand.
Not rotating
The ink cassette cannot be taken out.
Rotate the "COMPL,PIPE DRUM
RUBBER (4A000) " with the printing
paper in the reverse direction from
the back side with your hand and
Only the ink cassette
take the ink cassette out slowly.
can be taken out.
The ribbon cannot be taken out.
Dis-assemble the compl mechanism
to the point of removing the
"COMPL, HOLDER, PINCH EXIT
the parts concerned with the end of
the printing paper and take the
printing paper out slowly.
Not rotating Rotating in reverse direction only
Rotate the "PULLEY,DRUM
(4F000) " in the reverse direction.
When the end of the printing paper
appears at the paper exit, catch the
end of the printing paper, and take it
out slowly.
Rotating
Rotate the "PULLEY,DRUM (4F000) " in the
reverse direction until the end of the
printing paper comes to the paper exit.
Catch the end of the printing paper and
take it out slowly.
–29–
" . (Refer to NOTE 2.) Remove