Guide,Paper Exit", "Compl - Sanyo DVP-P1EX Technical Information
Digital photo printer
Hide thumbs
Also See for DVP-P1EX:
- Instruction manual (56 pages) ,
- Service manual (20 pages) ,
- Instruction manual (56 pages)
Table of Contents
Advertisement
3-15. "GUIDE,CASSETTE R (3B100) " and
"COMPL PWB,MC-3 (MC-3) "
(See Figs. 3-15-1 to 3-15-2)
1)
Referring to section 3-14, remove the "ASSY,CHASSIS R
(7A000)
".
2)
Remove the "SCR S-TPG BIN 2.6X4
remove the "GUIDE,CASSETTE R
Fig. 3-15-1.)
3)
Remove the two "SCR S-TPG BIN 2.6X4
remove the "COMPL PWB,MC-3
3-15-2.)
ASSEMBLY NOTES:
1.
Install the "GUIDE,CASSETTE R
positioning hole on it aligns with the dowel on the
(7C000)
"ASSY,CHASSIS L
3-15-1.
2.
Referring to section 3-9, align phase between the "CAM,
(5L000)
MECHANISM R
(5K000)
".
3.
Referring to section 3-6 and 3-7, adjust the tension of the
"BELT,MOTOR STEP
(4I000)
".
Positioning Hole
Dowel
Positioning Hole
Dowel
ASSY,CHASSIS L (7C000)
Fig. 3-15-1
SCR S-TPG BIN 2.6X4 (3C000)
COMPL PWB,MC-3 (MC-3)
Fig. 3-15-2
(3B200)
" and
(3B100)
". (Refer to
(3C000)
(MC-3)
". (Refer to Fig.
(3B100)
" so that the
" as shown in Fig. A of Fig.
" and the "CAM,MECHANISM L
(4J000)
" and "BELT,DRUM
FIg. A
Positioning Hole
GUIDE,CASSETTE R
(3B100)
Dowel
SCR S-TPG BIN 2.6X4
(3B200)
3-16. "GUIDE,PAPER EXIT (6P100) ",
"COMPL PWB,MC-4 (MC-4) ", and
"COMPL PWB,MC-5 (MC-5) "
(See Figs. 3-16-1 to 3-16-2)
1)
Referring to section 3-14, remove the "ASSY,CHASSIS R
(7A000)
".
2)
Remove the two "SCR S-TPG BIN 2.6X4
remove the "GUIDE,PAPER EXIT
" and
Fig. 3-16-1.)
3)
Remove the two "SCR S-TPG BIN 2.6X4
remove the "COMPL PWB,MC-4
3-16-1.)
4)
Remove the two "SCR S-TPG BIN 2.6X4
remove the "COMPL PWB,MC-5
3-16-2.)
ASSEMBLY NOTES:
1.
Install the "GUIDE,PAPER EXIT
positioning hole on it aligns with the dowel on the
"ASSY,CHASSIS L
2.
Referring to section 3-9, align phase between the "CAM,
MECHANISM R
(5K000)
".
3.
Referring to section 3-6 and 3-7, adjust the tension of the
"BELT,MOTOR STEP
(4I000)
".
ASSY,CHASSIS L
(7C000)
SCR S-TPG BIN 2.6X4 (6P300)
–24–
(6P100)
(MC-4)
(MC-5)
(6P100)
(7C000)
" as shown in Fig. A.
(5L000)
" and the "CAM,MECHANISM L
(4J000)
" and "BELT,DRUM
GUIDE,PAPER EXIT (6P100)
Positioning
Hole
Dowel
Fig. 3-16-1
(6P300)
" and
". (Refer to
(6Q000)
" and
". (Refer to Fig.
(6Q000)
" and
". (Refer to Fig.
" so that the
FIg. A
Advertisement
Table of Contents
