Sanyo DVP-P1EX Technical Information page 13

2) Remove the two "SPRING, ARM TRAY PAPER
(Refer to Fig. 3-5-1 and Fig. 3-5-3.)
3) Remove the "SPECIAL WASHER-3.5X0.5
(Refer to Fig. 3-5-1.)
4) Remove the "ASSY,ROLLER,PICK GEAR
fer to Fig. 3-5-3.)
NOTE: Do not injure the rubber roller portion on the
"ASSY, ROLLER,PICK GEAR
out from the "ASSY, CHASSIS R
5) Remove the "GEAR, RELAY PICK UP
to Fig. 3-5-3.)
6) Remove the "ARM, TRAY PAPER L
Fig. 3-5-1.)
ASSEMBLY NOTES:
1. Align dowel 1 with hole 1 on the "ASSY, CHASSIS L
(7C000)
" and install the "ARM, TRAY PAPER L
as shown in Fig. 3-5-1.
2. Install the "SPRING, ARM TRAY PAPER
shown in Fig. C of Fig. 3-5-1.
3. Pay attention to the direction of installation of the "GEAR,
(6K000)
RELAY PICK UP
ROLLER, PICK GEAR
3-5-3.
4. Align dowel 2 with hole 2 and install the "GEAR, RELAY
(6K000)
PICK UP " to the "ASSY, CHASSIS R
as shown in Fig. 3-5-3. At that time, be careful that dowel
2 is not placed over the "CAM, MECHANISM R
5. Install the "SPRING, ARM TRAY PAPER
shown in Fig. D of Fig. 3-5-3.
6. Insert and hook the long end of the "SPRING, PINCH
(5H100)
RELEASE " between washer and arm plate, and
hook the short end onto the "GUIDE, PAPER PICK
(7I000)
" as shown in Figs. A and B of Fig. 3-5-2.
7. Do not injure the rubber roller portion on the "ASSY,
ROLLER, PICK GEAR
on the "ASSY, CHASSIS".
Fig. C
SPRING,ARM TRAY
PAPER (6N000)
SPECIAL
WASHER-3.5X0.5
(6M000)
ARM,TRAY PAPER L
(6L000)
Fig. 3-5-1
(6N000)
(6M000)
(6J000)
(6J000)
" when pulling it
(7A000)
".
(6K000)
". (Refer
(6L000)
". (Refer to
(6L000)
(6N000)
" and install it on the "ASSY,
(6J000)
" as shown in Fig. E of Fig.
(7A000)
(5L000)
(6N000)
(6J000)
" when inserting it into hole
Hole 1
Dowel 1
ASSY,CHASSIS L (7C000)
".
SCR S-TPG BIN
2.6X5 (7J000)
".
GUIDE,PAPER PICK
(7I000)
". (Re-
SPRING,
PINCH
RELEASE
(5H100)
"
" as
"
Washer
".
" as
Fig. A
ASSY,ROLLER,PICK GEAR (6J000)
Rubber roller
portion
GEAR,RELAY
PICK UP (6K000)
CAM,MECHANISM R
(5L000)
ASSY,CHASSIS R (7A000)
–13–
SPRING,PINCH RELEASE
(5H100)
Washer
Shaft
Shaft
Arm Arm
Fig. B
Fig. 3-5-2
SPRING,ARM TRAY PAPER
(6N000)
Dowel 2
Fig. D
ASSY,ROLLER,PICK
GEAR (6J000)
Hole 2
Fig. E
GEAR,RELAY PICK UP
(6K000)
Fig. 3-5-3