Paper Stopping - Sanyo DVP-P1EX Technical Information

4-4.

Paper stopping

Remove the "COVER,BACK-SVF01/EX (03400) " on the back side and check that the printing paper is
rolled over the COMPL,PIPE DRUM RUBBER (4A000) ".
The end of the printing paper is sticking
out.
Catch the end of the printing paper and
take it out slowly.
To set the "CAM,MECHANISM L (5K000) " to exit paper mode 2 , rotate the worm gear on the
"COMPL,MOTOR CAM (6A000) ".
After rotating the "PULLEY,DRUM (4F000) " once in the reverse direction, rotate it to the regular direction
and check that the printing paper is carried out.
Rotating in regular direction
Rotate the "PULLEY,DRUM (4F000) " in
the regular direction and take the printing
paper out.
Dis-assemble the compl mechanism to the
point of removing the "COMPL, HOLDER,
PINCH
Remove the parts concerned with the end
of the printing paper and take the printing
paper out slowly.
NOTE 1: The rotation direction of the Motor Pulley is as follows:
"COMPL,MOTOR CAM
When rotated in the direction shown by arrow A in Fig. A of Fig. 3-9-1 in section 3-9, the mechanism mode shifts in the
following order:
NOTE 2: "COMPL,HOLDER,PINCH
- "COMPL,HOLDER,PINCH SIDE
- "COMPL,HOLDER,PINCH EXIT
- "COMPL,HOLDER,PINCH PICK
- "COMPL,HOLDER,PINCH EXIT F
The printing paper does not exit.
If possible, take the ink cassette out.
Only the printing paper is rolling over the
"COMPL,PIPE DRUM RUBBER (4A000) ".
Remove the cabinet parts and remove the
compl mechanism.
If unable to perform step 2, take the ink cassette out.
Rotate the "COMPL,PIPE DRUM RUBBER
(4A000) " with the printing paper in the reverse
direction from the back side with your hand.
Not rotating
". (Refer to NOTE 2.)
(6A000)
":
Standby Paper exit
" refers to the following parts.
(5A000)
"
(5B000)
"
(5D000)
"
(5E000)
"
Not rotating
Rotate the "PULLEY,DRUM (4F000) " in the
reverse direction until the end of the
printing paper comes to the paper exit.
Catch the end of the printing paper and
take it out slowly.
Paper/Ribbon advance
–28–
Continued to A on the next page.
Rotating in reverse direction only
Rotate the "PULLEY,DRUM (4F000) " in
the reverse direction. When the end of
the printing paper appears at the paper
exit, catch the end of the printing paper,
and take it out slowly.
Rotating
Paper-supply Print.