Toro 23522 Operator's Manual page 18

2. Drain the oil from the engine
Figure 20
3. Remove the engine-oil filter
the oil is drained, install a new oil filter.
Note:
Ensure that the new oil-filter gasket
touches the engine, and then tighten the filter
an extra 3/4 turn.
(Figure 20).
g029369
(Figure 21). After
18
Figure 21
4. Slowly pour approximately 80% of the specified
amount of oil into the fill hole
5. Allow 3 to 5 minutes for the oil to settle, then
check the oil level
(Figure 22).
(Figure 22).
g027477