1. Operator's Manual tube
2. Clamp (2)
3. Throttle cable
3.
Slide the clamps onto the Operator's Manual
tube and install it on top of the lower handle
using 2 slotted-head bolts and 2 locknuts
4).
2
Connecting the Negative
Battery Cable
No Parts Required
Procedure
1.
Remove the plastic cap from the negative
battery terminal.
2.
Connect the negative battery cable to the
negative (-) battery post using the bolt and nut
attached to the cable
Figure 4
4. Slotted-head bolt (2)
5. Cable tie
6. Locknut (2)
(Figure
5).
1. Negative battery cable
g195541
2. Bolt and nut
(Figure
7
Figure 5
3. Battery
g195546