Table of Contents
Advertisement
Opening screen
Disk Types
Hard disk
The XEN-LS II supports a maximum of two IDE hard disk
drive(s). The type of drive fitted is displayed in these two
text boxes.
Floppy disk
The XEN-LS II can be fitted with one or two floppy drives.
These text boxes are used to display the type of drive
fitted.
There is no need to change the floppy drive type unless
you are adding a drive.
Change
The Change button accesses a screen which allows you
to select the type of each floppy drive, and provides for the
possible inclusion of user-defined hard disk drives.
The Change disk type screen is described in more detail
later in this section.
Boot device
The boot device option group allows you to select where
you want the XEN-LS II to look for an operating system
when it is switched on or rebooted. The group contains
three option buttons, these choose between booting from a
hard or floppy disk in the computer, and remotely across
the on-board Ethernet interface using different types of
remote boot.
If you make an inappropriate selection it may result in the
computer failing to find an operating system and being
unable to boot.
Before selecting a remote boot option check with your
network administrator.
7
Advertisement
Table of Contents
