Expansion Cards - Mitsubishi Electric apricot XEN-LS II Using Setup And Installing Add-Ons

Expansion cards

Installation
The XEN-LS II provides three slots for the installation of
expansion cards. These slots are ISA (also known as AT)
compatible.
Installation of an expansion card in the XEN-LS II is a
simple process requiring the removal of only the system
unit cover and a blanking plate. The following instructions
and illustrations describe how to install a card in a simple
step-by-step sequence.
1. Power the system down.
2. Take suitable anti-static precautions and remove the
system unit cover.
If you are unfamiliar with Apricot's recommended
anti-static precautions and/or the process of
removing the system unit cover refer to either; the
appendices at the rear of this guide, or your Owner's
Handbook .
3. With the system unit cover removed, the space for
expansion cards will be visible. It is on the left side
of the system unit behind the activity indicators and
the volume control. Use the illustration below to help
you identify this area.
EXPANSION CARD
CONNECTORS
BLANKING PLATES
CARD GUIDES
23