Mitsubishi Electric apricot XEN-LS II Using Setup And Installing Add-Ons page 32

Inserting a SIMM
From the table of possible SIMM combinations decide
which SIMM capacity will be installed in the socket. Then
install the SIMM.
To fit a SIMM:
1. The SIMM will only install in one orientation. There is
a cutout at one end of the SIMM next to the
connector strip.
Hold the SIMM with the cutout on the right and metal
connector strip nearest the motherboard.
2. Position the SIMM above the socket with the SIMM
tilted slightly towards the front of the system unit.
3. Lower the SIMM into the socket, and ensure that the
SIMM is properly located in the connector.
30