Table of Contents
Advertisement
Volume
The volume control adjusts the output level of the Power-
On Sound. Use it to adjust the volume to suit the
computer's location.
Test
Use the Test button to preview the Power-On Sound to
ensure that you have set it to a suitable level.
Set Power-on Password
The XEN-LS II supports a power-on password. If enabled this
password must be entered every time the system is powered
up or rebooted. If you have Apricot LOC Technology enabled
the power on password cannot be used.
When the power-on password is enabled the text box can
be selected and a password entered. The password has a
minimum length of 1 character and a maximum length of 7
characters.
Monitor type
There are three option buttons in this group: VGA, HiVision
14" and Multi-sync [14/17]. The three options alter the
timings of video signals provided by the XEN-LS II video
connector to suit a variety of different types of monitor.
It is important to ensure that you have made the correct
selection.
VGA
If you have a standard VGA monitor such as the Apricot
14" VGA Colour, or Apricot 14" VGA Paper-White you must
choose this option.
Higher resolution monitors will display standard VGA video
modes correctly if you select this option. However, if you
try to use higher resolution outputs, it is unlikely that they
will display correctly. For monitors that are capable of
displaying resolutions higher than 640x480 you should
choose one of the other selections.
9
Advertisement
Table of Contents
