Mib Support; Vendor Specific Device Mib - ABB EDS500 Series Function Manual

SNMP Network Management
< c l e a r s y s t e m s n m p r e a d - c o m m u n i t y [ { c o m m u n i t y s t r i n g } ] >
< c l e a r s y s t e m s n m p w r i t e - c o m m u n i t y [ { c o m m u n i t y s t r i n g } ] >
2.27.2

MIB Support

EDS500 devices support the following MIBs:
Name
MIB-2
SNMPv2-MIB
BRIDGE-MIB
IF-MIB
IP-MIB
TCP-MIB
UDP-MIB
RMON-MIB
LLDP-MIB
HYTEC-MIB
Table 39: Supported MIBs
2.27.3

Vendor Specific Device MIB

In addition to the objects of the standard MIBs listed in Chapter 2.27.2, "MIB Support" the
EDS500 devices have further, device specific objects that are defined in a dedicated vendor
proprietary MIB. This is called ABB-EDS500-MIB and includes definitions of product ids, trap
ids and object ids (OIDs).
Product IDs
Return value for the object sysObjectID (1.3.6.1.2.1.1.2.0) of the MIB-2 group 'system'.
Object name
eds500nmd01
eds500nmd02
eds500nmd11
eds500nmd20
Table 40: Product IDs for sysObjectID
2.27.3.1 Trap IDs
Refer to "Tab. 57: Trap messages of EDS500 devices".
2.27.3.2 Object IDs
Object name
OID
runConfigSizeValue
Table 41: Objects of the group abb->abbConfig
92
Reference:
RFC 1213
RFC 3418
RFC 1493 / RFC 4188
RFC 2863
RFC 4293
RFC 4022
RFC 4113
RFC 2819
IEEE 802.1AB
Manufacturer specific device MIB
OID
1.3.6.1.4.1.21939.1.5.1
1.3.6.1.4.1.21939.1.5.2
1.3.6.1.4.1.21939.1.5.11
1.3.6.1.4.1.21939.1.5.20
Read object
Size of the running-config
Functions
Device name
500NMD01
500NMD02
500NMD11
500NMD20
Write object
1KGT151021 V000 1