How To Read These Operating Instructions; Approvals; Symbols - GE AF-650 GP Operating Instructions Manual

How to Read these Operating...
1
1

1 How to Read these Operating Instructions

1.1.1 How to Read these Operating
Instructions
The drive is designed to provide high shaft performance
on electrical motors. Please read this manual carefully for
proper use. Incorrect handling of the frequency converter
may cause improper operation of the frequency converter
or related equipment, shorten lifetime or cause other
troubles.
These Operating Instructions will help you get started,
install, program, and troubleshoot your drive.
Chapter 1, How to Read these Operating Instructions,
introduces the manual and informs you about the
approvals, symbols, and abbreviations used in this
literature.
Chapter 2, Safety Instructions and General Warnings,
entails instructions on how to handle the drive correctly.
Chapter 3, How to Install, guides through mechanical and
technical installation.
Chapter 4, How to Programme, shows how to operate and
programme the drive via the Keypad.
Chapter 5, General Specifications, contains technical data
about the drive.
Chapter 6, Warnings and Alarms, assists in solving
problems that may occur when using the drive.
Available literature
- The AF-650 GP Design Guide DET-619 entails all
technical information about the drive and
customer design and applications.
- The AF-650 GP Programming Guide DET-618
provides information on how to programme and
includes complete parameter descriptions.
GE technical literature is also available online at
www.geelectrical.com/drives.
4
AF-650 GP High Power Operating Instructions

1.1.2 Approvals

1.1.3 Symbols

Symbols used in this Operating Instructions.
NOTE
Indicates something to be noted by the reader.
CAUTION
Indicates a potentially hazardous situation which, if not
avoided, may result in minor or moderate injury or
equipment damage.
WARNING
Indicates a potentially hazardous situation which, if not
avoided, could result in death or serious injury.
∗
Indicates default setting