Remote Capture - Siemens SIMATIC NET SCALANCE W780 Series Configuration Manual
Industrial wireless lan scalance w780/w740 to ieee 802.11n web based management
Hide thumbs
Also See for SIMATIC NET SCALANCE W780 Series:
- Configuration manual (317 pages) ,
- Reference manual (84 pages)
Table of Contents
Advertisement
Configuring with Web Based Management
6.6 "Interfaces" menu
6.6.3
Remote Capture
On this WBM page activate the function "Remote Capture" on the interface (Ethernet,
WLAN). The function is for network diagnostics via a connected PC, e.g. to detect transfer
errors.
You can also enable the function on several interfaces at the same time. When the function
is enabled the interface can be linked in Wireshark. For a period Wireshark record the data
traffic over the interface. Afterwards from the recording you can see the content of the
frames or filter according to certain contents.
Description
This table contains the following columns:
● Interface
The interface to which the entry relates.
● Enable
Enable or disable the "Remote Capture" function. As default, the function is disabled.
Note
Performance
Enable the function only for diagnostics purposes. The increased data traffic could
influence the performance of the device.
324
SCALANCE W780/W740 to IEEE 802.11n Web Based Management
Configuration Manual, 08/2018, C79000-G8976-C267-13
Hide quick links:
Advertisement
Table of Contents
