Husqvarna Automower 310 Operator's Manual page 42

Message Cause
No loop signal
The boundary wire is crossed on its
way to and from an island.
The connection between the product
and the charging station has been bro-
ken.
Disturbances from metal objects (fen-
ces, reinforcement steel) or buried ca-
bles close by.
Trapped
The product is caught in something.
The product is stuck behind a number
of obstacles.
Outside work area The boundary wire connections to the
charging station are crossed.
The boundary wire is too close to the
edge of the work area.
The work area slopes too much by the
boundary loop.
The boundary wire is laid in the wrong
direction around an island.
Disturbances from metal objects (fen-
ces, reinforcement steel) or buried ca-
bles close by.
The product finds it hard to distinguish
the signal from another product installa-
tion close by.
Empty battery
The product cannot find the charging
station.
The guide wire is broken or not connec-
ted.
The battery is spent.
The charging station's antenna is de-
fective.
42 - Troubleshooting
Action
Check that the boundary wire is laid ac-
cording to instructions, e.g. in the right
direction around the island. Refer to
install the boundary wire on page 21 .
Place the product in the charging sta-
tion and generate a new loop signal.
Try moving the boundary wire.
Free the product and rectify the reason
for it becoming trapped.
Check if there are any obstacles which
make it hard for the product to move
away from this location.
Check that the boundary wire is con-
nected correctly.
Check that the boundary wire has been
laid according to the instructions. Refer
To install the boundary wire on page
to
21 .
Try moving the boundary wire.
Place the product in the charging sta-
tion and generate a new loop signal.
Check that the charging station and the
guide wire are installed in accordance
with the instructions. Refer to
tion of the product on page 21 .
Find out where the break is and rectify
it.
Replace the battery. Refer to
move the battery on page 52 .
Check if the indicator lamp in the
charging station flashes red. Refer to
Indicator lamp in the charging station
on page 47 .
To
Installa-
To re-
1220 - 001 -