Operating Mode - Park; To Stop The Product; To Switch Off The Product; Timer And Standby - Husqvarna Automower 310 Operator's Manual

Note: It is recommended to change the operation
Main area before you put the product
selection to
in the charging station.
4.3.3 Override timer
The timer settings can be temporarily overridden
Override timer . It is possible to
by selecting
override the timer for 24 h or 3 days h or days.
4.3.4 Spot cutting (Automower
Spot cutting is useful for quickly mowing an area
where the grass has been mown less than in
other parts of the garden.
Spot cutting means that the product mows in a
spiral pattern in order to cut the grass in the area
where it was started. When this is done, the
product automatically switches back to
Secondary area .
or
Spot cutting function is activated with the
The
START button. You can select how the product
should continue to work once mowing is finished
by pressing right arrow button and then selecting
On Main area or On Secondary area .

4.4 Operating mode - Park

When the PARK button is pressed the following
operation selections can be chosen.
• Park until further notice
• Start again in 3 hours
• Start with next timer
4.4.1 Park until further notice
The product stays in the charging station until
another operating mode is selected by pressing
the START button.
4.4.2 Start again in 3 hours
The product stays in the charging station for 3
hours and then automatically goes back to the
usual operation. This operation selection is
applicable when it is necessary to pause
operation.
4.4.3 Start on next timer
The product stays in the charging station until the
next Timer setting permits operation. This
operation selection is suitable if one wishes to
cancel an ongoing mowing cycle and allow the
product to stay in the charging station until the
next day.
1220 - 001 -

4.5 To stop the product

1. Press the STOP button on top of the
product.
The product stops and the blade motor stops.
®
315/315X)

4.6 To switch off the product

1. Press the STOP button on top of the
product.
Main area
2. Set the Main switch to position

4.7 Timer and Standby

The product has an inbuilt standby period
according to the Standby time table. The standby
period provides for instance a good opportunity to
water or play games on the lawn.
Model
Automower
Automower
Automower
The factory settings for the timer allow the
product to operate around the clock 7 days a
week. However, the product will not operate
during the built-in standby period.
WARNING: Always switch off the
product using the main switch if it
requires maintenance, or if the product
must be moved outside the work area.
Standby time, minimum
hours per day
®
310 6
®
315 2
®
315X 2
Operation - 35
0 .