SCHLCCH outputs signals
– CH1LIV
– LNK1LIV
– CH2LIV
– LNK2LIV
– CH3LIV
– LNK3LIV
Figure 96: Adding RCHLCCH and SCHLCCH blocks in the Application Configuration Tool
7 4
Status of Ethernet channel X1 / LAN1. Value is True if the port is receiving
Ethernet frames. Valid only when redundant mode is set to None or port is
not one of the redundant ports (LAN A or LAN B)
Link status of Ethernet port X1 / LAN1
Status of Ethernet channel X2 / LAN2. Value is True if the port is receiving
Ethernet frames. Valid only when redundant mode is set to None or port is
not one of the redundant ports (LAN A or LAN B)
Link status of Ethernet port X2 / LAN2
Status of Ethernet channel X3 / LAN3. Value is True if the port is receiving
Ethernet frames. Valid only when redundant mode is set to None or port is
not one of the redundant ports (LAN A or LAN B)
Link status of Ethernet port X3 / LAN3
1V LG 5 00007 E