Figure 32: Example Of Setting Values For Current Sensor In Pcm600; Figure 33: Example Of Parameter Setting For Phiptoc1 Start Value In Pcm600 - ABB UniGear Series Engineering Manual

Primary, Nominal current and Rated secondary values are entered via parameter setting in
PCM600 (IED Configuration / Configuration / Analog inputs/Current (3I, CT))

Figure 32: Example of setting values for current sensor in PCM600

Unless otherwise specified, the
Primary Current
Each setting parameter of current protection functions is divided by application nominal cur-
rent I .
n
Threshold for
I 2 000 A
nTRIP
=
I 1 000 A
n

Figure 33: Example of parameter setting for PHIPTOC1 Start value in PCM600

2 8
Nominal Current
setting which is a reference value for protection functions.
PHIPTOC1
Start value tripping at 2 000 A is:
= 2
setting should always be the same as the
1V LG 5 00007 E