Programming Dil Overflow; Programming Incoming Ring Group Overflow - NEC Aspire S IntraMail System Manual

Voice Mail Overflow
Programming
Programming DIL Overflow
Step 1
Step 2
Step 3
Programming Incoming Ring Group Overflow
Step 1
Step 2
Step 3
178 ◆ Chapter 2: Features
Set up Direct Inward Lines.
22-02-01: Incoming Call Trunk Setup
1.1
- Assign Service Type 4 to each trunk you want to be a DIL. Make a separate entry for each
Night Service mode.
✔
By default, trunks are Service Type 0 (Normal).
22-07-01: DIL Assignment
1.2
- For each trunk designated as a DIL above, enter the extension number of the DIL destina-
tion (e.g., 306). Make a separate entry for each Night Service mode.
✔
By default, there are no DIL destinations programmed.
Assign IntraMail as the overflow (no answer) destination.
22-08-01: DIL/IRG No Answer Destination
2.1
- For each trunk assigned as a DIL above, enter 102 to make IntraMail the overflow (no
answer) destination.
✔
By default, the overflow (no answer) destination is Incoming Ring Group 1.
Set the interval after which unanswered calls should route to the overflow destination.
22-01-04: DIL No Answer Recall Time
3.1
- Enter the interval after which unanswered calls should overflow to the programmed over-
flow (no answer) destination.
✔
By default, this interval is 0 (no overflow).
Set up the Incoming Ring Group trunks.
22-02-01: Incoming Call Trunk Setup
1.1
- Assign Service Type 0 (Normal) to each Incoming Ring Group trunk. Make a separate
entry for each Night Service mode.
✔
By default, trunks are Service Type 0 (Normal).
Assign IntraMail as the overflow (no answer) destination.
22-08-01: DIL/IRG No Answer Destination
2.1
- For each trunk assigned as an Incoming Ring Group trunk above, enter 102 to make Intra-
Mail the overflow (no answer) destination.
✔
By default, the overflow (no answer) destination is Incoming Ring Group 1.
Set the interval after which unanswered calls should route to the overflow destination.
22-01-04: DIL No Answer Recall Time
3.1
- Enter the interval after which unanswered calls should overflow to the programmed over-
flow (no answer) destination.
✔
By default, this interval is 0 (no overflow).
IntraMail for Aspire System Guide