TP48200A-HX09A2, TBC300A-TCA2 Outdoor Power
System
User Manual
Figure 4-29 Position of the battery temperature sensor
Step 4 Properly place the new battery temperature sensor and bind it securely with a cable tie.
Step 5 Reconnect the battery temperature sensor cable to the UIM.
Step 6 Disconnect the ground cable from the ESD wrist strap, and take off the ESD wrist strap and
ESD gloves.
----End
4.4.15 Replacing a Temperature Sensor
Prerequisites
Procedure
Step 1 Connect the ground cable to the ESD wrist strap, and put on the ESD wrist strap and ESD
gloves.
Step 2 Remove the temperature sensor cable from the UIM, as shown in
Issue 02 (2019-02-26)
You have obtained an ESD wrist strap, a pair of ESD gloves, an ESD box or bag, the
cabinet door key, and a maintenance tool kit.
The new temperature sensor is intact.
Copyright © Huawei Technologies Co., Ltd.
4 Maintenance
Figure
4-30.
79