Huawei TP48200A-HX09A2 User Manual page 72

TP48200A-HX09A2, TBC300A-TCA2 Outdoor Power
System
User Manual
Figure 4-16 Removing the heat exchanging core
Step 4 Clean the heat exchanging core, or replace it with a new one.
Step 5 Install the heat exchanging core.
Step 6 Take off protective gloves.
Step 7 Connect the –48V power cable to the UIM02C.
Step 8 Push in the UIM02C and secure the screws.
Step 9 Connect the signal cable to the UIM02C panel based on the record made previously.
Step 10 Disconnect the ground cable from the ESD wrist strap and take off the ESD wrist strap and
ESD gloves.
----End
Issue 02 (2019-02-26) Copyright © Huawei Technologies Co., Ltd.
4 Maintenance
65