The Advanced Menu - Siemens SIMATIC PG 720 P Manual

Configuring the PG 720
6.1.2

The Advanced Menu

Menu Structure
Figure 6-8
Settings in the Plug & Play O/S
Advanced Menu
Reset
Configuration
Data
Diskette
controller
Local Bus IDE
adapter
6-14
PhoenixBIOS Note BIOS 4.0 Setup-Copyright 1985-95 Phoenix Technologies Ltd.
Main Advanced Security
Warning!
Setting items on this menu to incorrect values
may cause your system to malfunction.
PCI Devices
Plug & Play O/S [No]
Reset Configuration Data [No]
Diskette Controller: [Enabled]
Local Bus IDE Adapter: [Enabled]
VGA Interrupt: [Enabled]
[DOS]
Large Disk Access Mode:
F1 Help Select Item – / +
ESC Exit Select Menu Enter Select
"Advanced" Menu
Plug and play means that fitted modules are automatically
recognized and installed provided they support plug and play
functions.
[No]
[Yes]
[Yes]
[No]
Enables or disables the floppy controller of the basic module.
[Enabled]
[Disabled]
Power Savings Exit
Item Specific Help
Change Values F9 Setup Defaults
Sub-Menu F10 Previous Values
The BIOS handles the complete plug and play
facilities
The operating system handles some of the
plug and play functions
All previous installations under plug and
play are deleted, and the configuration is
retriggered the next time the system is loaded.
The entry is then set to [No]. System
components which have no plug and play
facilities must be entered manually.
The system components with plug and play
facilities are initialized the next time the
system is loaded.
One IDE interface for up to two drives.
No local IDE interface
PG 720 P Programming Device
C79000-G7076-C721-02