Siemens SIMATIC PG 720 P Manual page 22

Getting to Know the PG 720
Alphanumeric The largest block of keys on the keyboard is the alphanumeric keyboard with all
Keyboard
the keys for the letters of the alphabet, numerals and special characters. The
characters are arranged in basically the same way as on a normal typewriter.
However, there are a number of special keys which have special functions for
the PG 720.
Special Keys The special keys in the alphanumeric keyboard have the following functions:
Table 3-3
3-8
Functions of the Special Keys
Key
Backspace Key
This key moves the cursor one space to the left and deletes the
character at this position.
Enter Key
(Return, Enter, Line Feed ("New Line")
The return or enter key is used mainly to terminate a command line in
Enter
the operating system; that is, the command you have typed in is
executed when you press this key. For other uses of this key, please
refer to the user manual of the relevant user program.
CAPS LOCK Key
Caps
Lock
If you press this key, the middle LED at the top right-hand corner of
your keyboard lights up. All upper case characters and other characters
are output normally. If you want to type lower case letters in this
position, you must first press the shift key.
If you are using an international keyboard, you cancel this function by
pressing the CAPS LOCK key again. The LED then goes out.
If you have a German keyboard, you must press the shift $ key to
cancel this function.
NUM Key
F9
With these keys F
from the alphanumeric keyboard to numeric keys. The LED display
lights up. Press this key again to return to cursor control.
Tabulator Key
This moves the cursor depending on the selected tabulator positions.
"Fn" Special Key (combination key)
In conjunction with a second key (key combination), you activate
n
other key codes for special applications with this key (see Figure 3-9
Function Keys). This key is also used to emulate the numeric keypad
(Figure 3-8 Numeric Keypad).
CTRL Key (combination key)
This key is only used in combination with other keys. For example,
Ctrl
you press CTRL + ALT + Delete to reset and restart the operating
system. For other uses of this key, please refer to the user manual of the
relevant user program.
Function
+ ^ NUM , the emulated numeric block is switched
n
PG 720 P Programming Device
C79000-G7076-C721-02