Siemens SIMATIC PG 720 P Manual page 18

Getting to Know the PG 720
Right-Hand Side You access the slots for programming S5 submodules, S5/S7 memory cards,
Panel (Processing
the PCMCIA port, and the disk drive from the right-hand side of the PG 720
Side)
(processing side).
Figure 3-3
The following table contains an overview of the ports and connectors on the
right-hand side panel:
Table 3-2
PCMCIA type II port ; slot 2
PCMCIA type III port; slot 1
S5 submodule port
Memory card port
Disk drive
3-4
Ejector for PCMCIA
cards
PCMCIA type II; slot 2
PCMCIA type II/III; slot 1
Ejector for PCMCIA
cards
Orientation point
Memory card port
S5 submodule port
Right-Hand Side Panel (with Port Covers Removed)
Connectors on the Right-Hand Side Panel of the Unit
Interface Port
Ejector for diskettes
3.5 in. disk drive
Access LED
CD-ROM drive
Function
Connection for PCMCIA type II cards
Connection for PCMCIA type II/III cards
Programming SIMATIC S5 submodules
Programming SIMATIC memory cards
Working with 3.5" disks
PG 720 P Programming Device
C79000-G7076-C721-02