Mitsubishi Electric C70 Connection Manual page 48

Item
Base loading position
Applicable base unit
Input power supply
Input frequency
Input voltage distortion factor
Max. input apparent power
Input current
Repetitive peak current
Inrush current
5VDC
Rated output current
24VDC
5VDC
Overcurrent
*1
protection
24VDC
Overvoltage
5VDC
*2
protection*
Efficiency
Permissible instantaneous
*3
power off time
Dielectric withstand voltage
Insulation resistance
Noise immunity
Operation display
Fuse
Application
Rated switching
voltage/current
Minimum switching
load
Response time
Life time
Surge suppressor
Fuse
Terminal screw s ize
Applicable size of wire
Applicable crimping terminal
Applicable tightening torque
Mass [kg]
Q63P
Q series power supply module loading slot
Q38DB, Q312DB, Q63B, Q65B, Q68B, Q612B
24VDC+30%-35%
(15.6 to 31.2VDC)
-
-
45W
at 24VDC input: 1.82A or less
at 15.6VDC input: 2.8A or less
-
100A 1ms or less (at 24VDC
input)
6A
-
6.6A or more
-
10ms or less (at 24VDC input)
500VAC across primary and
5VDC
10MΩ or more
(measured with an insulation
resistance tester)
By noise simulator of 500Vp-p
noise voltage, 1μs noise width
and 25 to 60Hz noise frequen-
cy
LED display (Normal:
ON(Green), Error: OFF)
OFF to ON: 10ms or less , ON to OFF: 12ms or less
Mechanical: 20 million times or m ore
Electrical: 100 thousand times or more at rated switching voltage/current
0.33
Q64P
100 to 120VAC+10%-15%
/200 to 240VAC+10%-15%
(85 to 132VAC/170 to
264VAC)
50/60Hz±5%
5% or less
160VA
at 100VAC input: 1.3A or less
at 200VAC input: 0.75A or less
4A or less
20A 8ms or less
9.9A or more
5.5 to 6.5V
70% or more
20ms or less
Across inputs/LG and outputs/FG
2,830VAC rms/3 cycles
(Altitude: 2,000m (6,561.68ft.))
Input and LG batched, output and FG batched,
batch input-LG, batch output-FG
10MΩ or m ore by insulation resistance tester (500VDC)
By noise simulator of 1,500Vp-p noise voltage, 1μs noise width
and 25 to 60Hz noise frequency
Noise voltage IEC61000-4-4, 2kV
LED display (Normal:
*5
ON(Green), Error: OFF)
Built-in (Unchangeable by user)
ERR contact
24VDC, 0.5A
5VDC, 1mA
Note
None
M3.5 screw
2
0.75 to 2mm
RAV1.25-3.5, RAV2-3.5
0.66 to 0.89 N m
0.4
C70 Connection Manual
2.3 Power Supply
Q64PN
100 to 240VAC+10%-15%
(85 to 264VAC)
*4
8.5A
-
-
LED display (Normal:
ON(Green), Error: OFF)
0.47
29